Garage floor storm shelter hatch set into a concrete slab

Russellville, AR

Garage Floor Storm Shelters in Russellville

Compare this shelter type and send an estimate request. Independent local installers can review your property.

Referral service. Shelters are sold and installed by independent local installers.

How garage floor shelters work

A garage floor storm shelter is a below-floor unit set into a hole cut in the garage slab, closed by a sliding or lifting steel hatch. It is a common retrofit for homes built on a slab or crawlspace, because it is reached without going outside.

The installer cuts and removes part of the slab, excavates, sets the unit and pours concrete around it. When the hatch is closed, a car can usually park over it, so the garage keeps its normal use.

Before agreeing to a garage floor shelter, confirm where gas, water and electrical lines run under the slab, whether slab thickness and soil allow the cut, and how the hatch opens if a vehicle or debris is on top of it.

Ask the installer who applies for any permit, how water is kept out of the unit, and whether the model has been tested to ICC 500.

Why it matters in Russellville

Pope County has 30 tornadoes documented since 1950, according to NWS Little Rock, and the long-track tornado of February 5, 2008 killed five people near Atkins. A planned shelter gives a household somewhere to go when a warning is issued.

NWS Little Rock counts 30 tornadoes documented in Pope County since 1950, with 7 tornado deaths, and 2,478 tornadoes with 412 deaths statewide (NWS Little Rock: Arkansas tornadoes by county since 1950). Arkansas averages about 37 tornadoes a year (1991–2020, NWS Little Rock: Arkansas Weather Statistics for 2022). On February 5, 2008 a long-track tornado, later rated EF4, crossed Pope County and killed five people near Atkins (NWS Little Rock: Severe Weather on February 5, 2008), and on March 19, 2020 NWS Little Rock surveyed EF1 tornadoes near Hector and near Dabney and Smyrna (NWS Little Rock: March 19, 2020 tornado surveys).

What it costs

No official source publishes a price for this shelter type alone, and this site has no prices of its own. Published FEMA and FLASH ranges for safe rooms are shown below with their sources; installers quote your project after reviewing the property.

FEMA P-320, Taking Shelter from the Storm (5th ed., 2021) (Table II-3) lists average new-construction costs of about $6,300–$8,300 for an 8×8 ft safe room and $11,400–$13,600 for a 14×14 ft room. The FEMA residential safe room fact sheet gives about $8,000–$9,500 and $14,000–$17,000 for the same sizes. FLASH (Federal Alliance for Safe Homes) puts site-built and prefabricated safe rooms at roughly $3,000–$9,500 depending on size. Retrofits usually cost more; these are published ranges, not quotes.

What affects storm shelter cost in Russellville (no prices of our own)
Cost factorWhy it mattersPrice
Shelter typeBelow-ground, garage floor, above-ground, safe room or prefabricated unit; each has different excavation, anchoring and material needs.Quoted by the installer
Size and capacityFEMA and FLASH ranges rise with floor area; plan for everyone in the household.Quoted by the installer
New construction or retrofitFEMA notes retrofits in existing homes generally cost more than building a safe room during construction.Quoted by the installer
Site and soilExcavation, groundwater, slab condition, drainage and access for delivery trucks.Quoted by the installer
Doors, ventilation and testingTested door assemblies and ICC 500 documentation.Quoted by the installer
PermitsShelter permit rules for Russellville were not verified by this site; ask City of Russellville Planning & Development or your county.Quoted by the installer
Your projectEstimate request. No verified local prices exist, so this site publishes none of its own. Published FEMA and FLASH ranges are on the cost page.

How the process works

You send an estimate request, it is shared with independent local installers, they review your property and give written quotes, and you decide whether to hire anyone. Check permits and ICC 500 testing before you sign. Each step is listed below.

  1. Send an estimate request

    Tell us your town or ZIP, the shelter type you are considering and whether it is a new build or an existing home.

  2. Your request goes to Silvano Para

    The operator of this site reviews it and, with your consent, shares it with independent local installers serving your area.

  3. Installers contact you

    They may ask about your lot, basement, garage slab or floor plan and arrange a visit to look at the location.

  4. You compare written quotes

    Ask each installer about ICC 500 testing, permits, anchoring, insurance and what is included.

  5. You decide

    You are never obliged to hire anyone. Any contract and payment are between you and the installer.

Where you can request it

Requests are accepted from Russellville and nearby towns. Dardanelle, Clarksville, Morrilton, Atkins and Pottsville each have their own page with county tornado facts and permit notes; installers confirm availability for your address before arranging a visit.

Other types of storm shelters

The same estimate request covers the other shelter types. If an installer finds another type suits your home better, such as a garage floor unit instead of an in-ground one, they can quote that instead. Compare them all before you decide.

Request Shelter Information

Estimate request. Independent installers set any price after reviewing your property.

Submitting a request does not confirm an appointment, a price or acceptance of the job. Availability is not guaranteed.

Service Areas

Requests are accepted from Russellville and the surrounding Arkansas River Valley, and five nearby areas have their own page with county tornado facts: Dardanelle, Clarksville, Morrilton, Atkins and Pottsville. Independent installers confirm whether they cover your address before arranging any visit.

Nearby areas with their own page
AreaCountyPopulation (2020)Distance from RussellvilleNWS warning office
Dardanelle, ARYell4,517about 7 miles (11 min) by road from RussellvilleNWS Little Rock
Clarksville, ARJohnson9,381about 26 miles (30 min) west on I-40NWS Little Rock
Morrilton, ARConway6,992about 27 miles (31 min) east on I-40NWS Little Rock
Atkins, ARPope2,859about 14 miles (17 min) east on I-40NWS Little Rock
Pottsville, ARPope3,140about 8 miles (15 min) east by road from RussellvilleNWS Little Rock

Population: 2020 Census via Wikipedia. Distances are approximate road distances from downtown Russellville. Coverage outside these areas depends on installer availability.

Map © OpenStreetMap contributors. The map shows the area only; there is no office or showroom.